We are running a survey to help us improve the experience for all of our members. If you see the survey appear, please take the time to tell us about your experience if you can.
I had purchased C8051F330 Development Kit and having some problems.
I can download and debug the code from Silicon Laboratories IDE. and also via Flash Programming Tool Provided. But Can Not Do it through Keil uVision2. It gives an error stating "Target Failed To Respond. System Is Being Disconnected". Is There anything missing. I had installed uvision debug driver and having C8051Fxxx in Flash Downloader List
All programs for ISP I know of (FlashMagic, SILabs, Atmel) have problems with most USB to serial converters. At the FlashMagic forum there is an attempt to sort out which work and which do not for FM and I believe that those that work for FM will also work for SILabs. It seems that the chip inside is the determining factor.
If you believe that any USB to serial adapter does the job correctly, I have some Swampland in Florids to sell.
Erik
It seems that the chip inside is the determining factor. It seems that the chip inside the USB to serial converter is the determining factor.
A Dane correcting his own English, eh...? ;-)