We are running a survey to help us improve the experience for all of our members. If you see the survey appear, please take the time to tell us about your experience if you can.
I use a atmel's t89c51rd2 based terminal , i had a requirement of using the pstn line for data transfer to the server, the problem i am facing is that that rs 232 communication code does not seem to be communicating with the modem. i have heard that there is no handshake possible in these devices, hence the echo of the modem could be the problem.i have switched off the echo with the help of a pc. even then there seems to be little response from the modem.What other setting do i need to change in the modem or the device , for this to work. With Regards, Muthu Kumar K
You need to read the modem Manual to find out how to set it into Software flow-control mode.