We are running a survey to help us improve the experience for all of our members. If you see the survey appear, please take the time to tell us about your experience if you can.
Debug mode cursor doesn't show in C code file Hi,everyone, When i use ST-Link Debugger to debug code,the current cursor show in disassembly code windows. I want to set cursor show in c code file,what should i do?
i configure Options->Load Application at Startup and Debug Run to main()
Any idea how to do? Thanks
after initialation,program run in while loop,and i get massage from UART3 and analyze the data.
while (1) { ... if (USART3_ready_buf_ok){ USART_SendChars(USART1,USART3_ready_buf,USART3_ready_buf_len); McuProtocolUnpack(USART3_ready_buf,USART3_ready_buf_len); USART3_ready_buf_ok = 0; } }
0x08001FD6 2032 MOVS r0,#0x32 0x08001FD8 F7FFFADE BL.W 0x08001598 0x08001FDC 4814 LDR r0,[pc,#80] ; @0x08002030 0x08001FDE 7800 LDRB r0,[r0,#0x00] 0x08001FE0 B168 CBZ r0,0x08001FFE 0x08001FE2 4814 LDR r0,[pc,#80] ; @0x08002034 0x08001FE4 8802 LDRH r2,[r0,#0x00] 0x08001FE6 4914 LDR r1,[pc,#80] ; @0x08002038 0x08001FE8 4810 LDR r0,[pc,#64] ; @0x0800202C 0x08001FEA F7FFFAB7 BL.W 0x0800155C 0x08001FEE 4811 LDR r0,[pc,#68] ; @0x08002034 0x08001FF0 8801 LDRH r1,[r0,#0x00] 0x08001FF2 4811 LDR r0,[pc,#68] ; @0x08002038 0x08001FF4 F7FEFB94 BL.W 0x08000720 0x08001FF8 2000 MOVS r0,#0x00 0x08001FFA 490D LDR r1,[pc,#52] ; @0x08002030 0x08001FFC 7008 STRB r0,[r1,#0x00] 0x08001FFE E7EA B 0x08001FD6
Is the USART1 reference a typo?
It gets stuck in this loop? Or doesn't get there?
If it is not getting to this loop, then pay attention to where it is getting, and what it might be doing there. Check that clocks are enabled, etc.
Before getting in the loop,I sent a msg which can be read bu PC com tool,through USART1. After that,it gets stuck in the loop.But the cursor alsways stay in assembler code.