We are running a survey to help us improve the experience for all of our members. If you see the survey appear, please take the time to tell us about your experience if you can.
mdk-arm 5.24 link j-link report: Error: Cannot load driver 'a:\Keil_v5\ARM\Segger\JL2CM3.dll'.
Possible Reasons: - Driver DLL could not be found in the specified path - Driver DLL requires additional DLL's which are not installed - Required Hardware Drivers are not installed Debugger aborted !
mdk-arm 5.24 preview no this problem
With the help of Keil support I isolated the remaining issue.
I had an old JLink-dll in my path that was used. I can control the version of used dll in the debugger dialogue. The number 6.14 that was shown was not the one given in Keil directory.
I removed the old dll from my path (potentially I put a more recent one).
And no, I am not using China nor EDU Version of JLink :-) I am using JLink Base.
Regards, Adib. --
Is your J-Link original or Chinese clone?
Even fresh install 5.24a does not work. Adib.
Did 5.24a solved the problem for you?
After update to 5.24a i still suffer same problem. Do i have to remove keil completely and then install fresh?
Regards, Adib.
5.24A is now available for download :)
In a few days MDK-ARM V5.24a will be released. Meanwhile please use V5.23, offered at: www2.keil.com/.../install
The same problem. Keil removed 5.24 from web, By the way. Keil approach is not very serious
I confirm I have the same problém On 5,23 all workink OK