We are running a survey to help us improve the experience for all of our members. If you see the survey appear, please take the time to tell us about your experience if you can.
Hello, I've got a problem with the asynchronous interface of the XC161CJ. The ASC0 and the ASC1 are parametrized similar but only the ASC0 works in the correct way. On receiving data, the ASC1 interface generates no interrupt request, neither Receive nor Error Int. The pin registers (P3, DP3, ALTSEL0P3) are parametrized according to DAvE's output and the interface is enabled in the SCU. Can anybody help me who was already faced with this problem? Thanks a lot Alex Bayer
Thank you for this offer but i've found the Problem: The peripherals window of my Debugger showed the wrong informations due to a software error. So i only thought that the options for the ASC1-interface are right, but they were not.
Hi Alex, thanks for this feedback. $*** happens. ;-} Sounds like the typical programmer syndrome. After 8 hours you do not see the mistakes in your code. Stefan - best regards