• State Not Answered
  • Locked Locked
  • Replies 4 replies
  • Subscribers 21 subscribers
  • Views 1199 views
  • Users 0 members are here
2025 survey

We are running a survey to help us improve the experience for all of our members. If you see the survey appear, please take the time to tell us about your experience if you can.

Options
Related
How was your experience today?
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

No ULINK Device Found with Freescale FRDM-K64F

Waldemir Cambiucci

Hello,

After donwload and build with success the Project MEMS from APNT_271
(from here www2.keil.com/.../)

I´m receiving an error "No ULINK Device found", when I try to LOAD the Fash, Freescale FRDM-K64F.

Any help about my configuration for the project? What am I missing?

Many thanks in advance!

Waldemir.

Parents
  • 0 in reply to Andy Neil

    Thanks Andrew for your answer,

    That´s the reason of my question :) I don´t have it and I didn´t find a way to configure my uVision5 to no go to this error.
    So my question is how I can work around this.

    Any link or direction where I can find more Information how to configure my Project or Utilities tab in the uVision5?

    Many thanks!

    Waldemir.

Reply
  • 0 in reply to Andy Neil

    Thanks Andrew for your answer,

    That´s the reason of my question :) I don´t have it and I didn´t find a way to configure my uVision5 to no go to this error.
    So my question is how I can work around this.

    Any link or direction where I can find more Information how to configure my Project or Utilities tab in the uVision5?

    Many thanks!

    Waldemir.

Children