We are running a survey to help us improve the experience for all of our members. If you see the survey appear, please take the time to tell us about your experience if you can.
Hello everybody,
Sorry for my english.
I start a new prog, and so I am at the beging. This the first time that I include assembler code in a program write in C.
When I build all targets I have 2 warnings :
- Warning L1: Unresolved external symbol Symbol: ?C_START Module: STARTUP.obj (?C_STARTUP)
and
- Warning L2: Reference made to unresolved external Symbol: ?C_START Module: STARTUP.obj (?C_STARTUP) Address: 205FH
I read the help of Keil, but it does not do me much.
Note that I validated "Generate Assembler SRC File" in the option of main.c and in the option of "Source Group 1".
In the "source group 1" I have 2 files "main.c" and "STARTUP.A51"
Please find this two files :
main.c :
#include <REG51.H> void ecriture_flash(); void main() { unsigned char unite; unsigned char dizaine; unsigned char centaine; #pragma asm ORG 0000h JMP 2000h ORG 2000h #pragma endasm SM0=0; //UART en mode 1 SM1=1; //UART en mode 1 SM2=0; //Gestion multiprocesseur inactive REN=1; //Reception active TMOD=0x20; //Config Timer 1 en mode 2 et mode temporisateur TH1=255; //56000 Bauds TR1=1; //Active le timer 1 TI=0; centaine='3'; dizaine='2'; unite='1'; DPH=0xFF; DPL=0xFF; ACC=centaine; ecriture_flash(); DPH=0xFF; DPL=0xFE; ACC=dizaine; ecriture_flash(); DPH=0xFF; DPL=0xFD; ACC=unite; ecriture_flash(); DPH=0xFF; DPL=0xFC; ACC=0xDD; ecriture_flash(); while (1); } void ecriture_flash() { #pragma asm MOV R1, #02h MOV 0B1h, #0 //Cette commande et les 2 suivantes doivent obligatoirement être placé après l'adresse ORG 2000h, sinon destruction du uC CALL 1FF0h MOV 0B1h, #1 #pragma endasm }
and STARTUP.A51 :
$NOMOD51 ;------------------------------------------------------------------------------ ; This file is part of the C51 Compiler package ; Copyright (c) 1988-2005 Keil Elektronik GmbH and Keil Software, Inc. ; Version 8.01 ; ; *** <<< Use Configuration Wizard in Context Menu >>> *** ;------------------------------------------------------------------------------ ; STARTUP.A51: This code is executed after processor reset. ; ; To translate this file use A51 with the following invocation: ; ; A51 STARTUP.A51 ; ; To link the modified STARTUP.OBJ file to your application use the following ; Lx51 invocation: ; ; Lx51 your object file list, STARTUP.OBJ controls ; ;------------------------------------------------------------------------------ ; ; User-defined <h> Power-On Initialization of Memory ; ; With the following EQU statements the initialization of memory ; at processor reset can be defined: ; ; <o> IDATALEN: IDATA memory size <0x0-0x100> ; Note: The absolute start-address of IDATA memory is always 0 ; The IDATA space overlaps physically the DATA and BIT areas. IDATALEN EQU 80H ; ; <o> XDATASTART: XDATA memory start address <0x0-0xFFFF> ; The absolute start address of XDATA memory XDATASTART EQU 0 ; ; <o> XDATALEN: XDATA memory size <0x0-0xFFFF> ; The length of XDATA memory in bytes. XDATALEN EQU 0 ; ; <o> PDATASTART: PDATA memory start address <0x0-0xFFFF> ; The absolute start address of PDATA memory PDATASTART EQU 0H ; ; <o> PDATALEN: PDATA memory size <0x0-0xFF> ; The length of PDATA memory in bytes. PDATALEN EQU 0H ; ;</h> ;------------------------------------------------------------------------------ ; ;<h> Reentrant Stack Initialization ; ; The following EQU statements define the stack pointer for reentrant ; functions and initialized it: ; ; <h> Stack Space for reentrant functions in the SMALL model. ; <q> IBPSTACK: Enable SMALL model reentrant stack ; Stack space for reentrant functions in the SMALL model. IBPSTACK EQU 0 ; set to 1 if small reentrant is used. ; <o> IBPSTACKTOP: End address of SMALL model stack <0x0-0xFF> ; Set the top of the stack to the highest location. IBPSTACKTOP EQU 0xFF +1 ; default 0FFH+1 ; </h> ; ; <h> Stack Space for reentrant functions in the LARGE model. ; <q> XBPSTACK: Enable LARGE model reentrant stack ; Stack space for reentrant functions in the LARGE model. XBPSTACK EQU 0 ; set to 1 if large reentrant is used. ; <o> XBPSTACKTOP: End address of LARGE model stack <0x0-0xFFFF> ; Set the top of the stack to the highest location. XBPSTACKTOP EQU 0xFFFF +1 ; default 0FFFFH+1 ; </h> ; ; <h> Stack Space for reentrant functions in the COMPACT model. ; <q> PBPSTACK: Enable COMPACT model reentrant stack ; Stack space for reentrant functions in the COMPACT model. PBPSTACK EQU 0 ; set to 1 if compact reentrant is used. ; ; <o> PBPSTACKTOP: End address of COMPACT model stack <0x0-0xFFFF> ; Set the top of the stack to the highest location. PBPSTACKTOP EQU 0xFF +1 ; default 0FFH+1 ; </h> ;</h> ;------------------------------------------------------------------------------ ; ; Memory Page for Using the Compact Model with 64 KByte xdata RAM ; <e>Compact Model Page Definition ; ; Define the XDATA page used for PDATA variables. ; PPAGE must conform with the PPAGE set in the linker invocation. ; ; Enable pdata memory page initalization PPAGEENABLE EQU 0 ; set to 1 if pdata object are used. ; ; <o> PPAGE number <0x0-0xFF> ; uppermost 256-byte address of the page used for PDATA variables. PPAGE EQU 0 ; ; <o> SFR address which supplies uppermost address byte <0x0-0xFF> ; most 8051 variants use P2 as uppermost address byte PPAGE_SFR DATA 0A0H ; ; </e> ;------------------------------------------------------------------------------ ; Standard SFR Symbols ACC DATA 0E0H B DATA 0F0H SP DATA 81H DPL DATA 82H DPH DATA 83H NAME ?C_STARTUP ?C_C51STARTUP SEGMENT CODE ?STACK SEGMENT IDATA RSEG ?STACK DS 1 EXTRN CODE (?C_START) PUBLIC ?C_STARTUP CSEG AT 0 ?C_STARTUP: LJMP STARTUP1 RSEG ?C_C51STARTUP STARTUP1: IF IDATALEN <> 0 MOV R0,#IDATALEN - 1 CLR A IDATALOOP: MOV @R0,A DJNZ R0,IDATALOOP ENDIF IF XDATALEN <> 0 MOV DPTR,#XDATASTART MOV R7,#LOW (XDATALEN) IF (LOW (XDATALEN)) <> 0 MOV R6,#(HIGH (XDATALEN)) +1 ELSE MOV R6,#HIGH (XDATALEN) ENDIF CLR A XDATALOOP: MOVX @DPTR,A INC DPTR DJNZ R7,XDATALOOP DJNZ R6,XDATALOOP ENDIF IF PPAGEENABLE <> 0 MOV PPAGE_SFR,#PPAGE ENDIF IF PDATALEN <> 0 MOV R0,#LOW (PDATASTART) MOV R7,#LOW (PDATALEN) CLR A PDATALOOP: MOVX @R0,A INC R0 DJNZ R7,PDATALOOP ENDIF IF IBPSTACK <> 0 EXTRN DATA (?C_IBP) MOV ?C_IBP,#LOW IBPSTACKTOP ENDIF IF XBPSTACK <> 0 EXTRN DATA (?C_XBP) MOV ?C_XBP,#HIGH XBPSTACKTOP MOV ?C_XBP+1,#LOW XBPSTACKTOP ENDIF IF PBPSTACK <> 0 EXTRN DATA (?C_PBP) MOV ?C_PBP,#LOW PBPSTACKTOP ENDIF MOV SP,#?STACK-1 ; This code is required if you use L51_BANK.A51 with Banking Mode 4 ;<h> Code Banking ; <q> Select Bank 0 for L51_BANK.A51 Mode 4 #if 0 ; Initialize bank mechanism to code bank 0 when using L51_BANK.A51 with Banking Mode 4. EXTRN CODE (?B_SWITCH0) CALL ?B_SWITCH0 ; init bank mechanism to code bank 0 #endif ;</h> LJMP ?C_START END
Do you have an idea ?