How to select the board NUCLEO-L476RG in a new project
The corresponding device is supported by MDK-ARM V5.17 and the Device Family Pack Keil::STM32L4xx_DFP: http://www.keil.com/dd2/st/stm32l476rgtx/
With the PackInstaller select the device and install this DFP: http://www.keil.com/support/man/docs/uv4/uv4_ca_packinstaller.htm www2.keil.com/.../
A CMSIS-RTOS Blinky example project is prepared for demonstration.
Do also refer to our Keil Learning Platform at: www2.keil.com/.../
I have already did that. But when I look at the boards in the pack installer I only see the stm32L476RG eval board. I do not see the Nucleo L476RG that I have. Unless the board is not important for MDK