We are running a survey to help us improve the experience for all of our members. If you see the survey appear, please take the time to tell us about your experience if you can.
How to select the board NUCLEO-L476RG in a new project
The corresponding device is supported by MDK-ARM V5.17 and the Device Family Pack Keil::STM32L4xx_DFP: http://www.keil.com/dd2/st/stm32l476rgtx/
With the PackInstaller select the device and install this DFP: http://www.keil.com/support/man/docs/uv4/uv4_ca_packinstaller.htm www2.keil.com/.../
A CMSIS-RTOS Blinky example project is prepared for demonstration.
Do also refer to our Keil Learning Platform at: www2.keil.com/.../
I have already did that. But when I look at the boards in the pack installer I only see the stm32L476RG eval board. I do not see the Nucleo L476RG that I have. Unless the board is not important for MDK