We are running a survey to help us improve the experience for all of our members. If you see the survey appear, please take the time to tell us about your experience if you can.
we made some simple tests with STM32F100 Value Line Eval Board:
//------------------------------------------------------------------------------ // Variables static unsigned char sDstBuf[1024]; // 1KiB static unsigned char sSrcBuf[sizeof(sDstBuf)];
printf("Copying words from misaligned src to aligned dst buffer... "); memset(sDstBuf, 0xcd, sizeof(sDstBuf));
with optimize Level 3, optimize for time this takes 120usec
with optimize Level 0 155usec
almost the same if memcpy is used: memcpy(sDstBuf, (const void *)0xcd, sizeof(sDstBuf));
It runs into hard fault, if optimize Level >=1 and optimise for time is not set.
I think this is a compiler error..
We ran into this before with MDK 4.60, now we use 4.70A
Werner
You could consider using a __packed pointer.
Understand the underlying hardware along with what the processor does would help you make a sensible decision about what is best.
My advice would be to not just take the typical "you are wrong" and "the best way to do it is to" and the frequent "the only way to do it is to" that frequently appears from beginners right through to experts and professionals. Just remember that there is more than one way to skin a cat.
If you listen carefully, you might just be able to hear the cries of outrage.
Instead of using packed pointers, the code should do the best to align the data manually if trying to store big objects in arrays of smaller objects.