We are running a survey to help us improve the experience for all of our members. If you see the survey appear, please take the time to tell us about your experience if you can.
we made some simple tests with STM32F100 Value Line Eval Board:
//------------------------------------------------------------------------------ // Variables static unsigned char sDstBuf[1024]; // 1KiB static unsigned char sSrcBuf[sizeof(sDstBuf)];
printf("Copying words from misaligned src to aligned dst buffer... "); memset(sDstBuf, 0xcd, sizeof(sDstBuf));
with optimize Level 3, optimize for time this takes 120usec
with optimize Level 0 155usec
almost the same if memcpy is used: memcpy(sDstBuf, (const void *)0xcd, sizeof(sDstBuf));
It runs into hard fault, if optimize Level >=1 and optimise for time is not set.
I think this is a compiler error..
We ran into this before with MDK 4.60, now we use 4.70A
Werner
Cast a 1-Byte aligned pointer to a 4-Bytes aligned pointer would confuse the compiler.
For 1-Byte aligned pointer -> LDR For 4-Bytes aligned pointer with higher optimization -> LDM