debugging in keil for ARM920T S3c2440

All the ARM tool manuals are here:

http://www.keil.com/support/man_arm.htm

You should start, as the name suggests, with the Primer:

http://www.keil.com/support/man/docs/gsac/

Again, work through the example programs in the uVision manual:

http://www.keil.com/support/man/docs/uv4/uv4_examples.htm

Books to help you:

http://www.keil.com/books/

All the ARM tool manuals are here:

http://www.keil.com/support/man_arm.htm

You should start, as the name suggests, with the Primer:

http://www.keil.com/support/man/docs/gsac/

Again, work through the example programs in the uVision manual:

http://www.keil.com/support/man/docs/uv4/uv4_examples.htm

Books to help you:

http://www.keil.com/books/

Thanks for your reply.

I need a basic example for S3C2440A GIPO that can simulate in keil4 . what are target settings fro it. i have written one example which is working on Friendly ARM T35 board but its not simulating under keil4. In keil its giving error like , * error 65: access violation at 0x00000000 : no 'execute/read' permission,.

So give it some 'execute/read' permission!

Have you checked the examples provided by Keil?

Are you using a Dev Kit from Samsung? Have you checked for examples provided by Samsung? Or your Samsung distributor?

ok,

where to give these permissions . I know how to debug for LPC2148 as i am new to this S3C2440A i am getting this error.

www.keil.com/.../search.asp

Thank you for reply ,

i did some modifications to my memory map file but again in some memory range i am getting the error 65;

here i am placing my mp file.

LR_ROM1 0x00000000 { ; load region ER_ROM1 0x00000000 0x30400000 { ; load address = execution address *.o (RESET, +First) *(InRoot$$Sections) .ANY (+RO) } RW_RAM1 0x30040000 0x0040000 { ; RW data .ANY (+RW +ZI) } RW_IRAM1 0x40000000 0x00001000 { .ANY (+RW +ZI) }
}
also can you tell me how can i attach a zip file to this post.so that i will attach my project basic code.

Waiting for reply sir.