This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Porting a IAR Project to Keil (stm32 + freertos)

Hi,

so I uploaded a Project from STMicroelectronics. It is the IAR Project of the iNEMO Sensor Eval-Board from STmicro.

sourceforge.net/.../download

I failed a plenty times to converting it to KEIL.
(missing header files - but I surely added every folder into the includes in the settings and some points more)

If there is somebody who could help me it would be perfect.

In the uploaded file there is also my Keil Project in the EWARM-Project folder.

I have to setup a ROM offset (rom is starting at 0x8003000, because there is a ST DFU bootloader for firmware upgrade applications) in IAR the offset was done by a .icf file.

- i copied the startup file from the KEIL directory and replaced it with the IAR one.
(backup also in folder)

anyway take a look into the zip archive please.

It works perfectly in IAR.

- why am I need the project in keil? Because we want to switch from the lite version of IAR to the Keil prof. and we want to debug some code with the keil compiler.

I have a ST-Link and a KEIL uLINK2 and a ULINK PRO debugger.

Please help.

I found a application note for this topic but its seems not to be for free :(
url: www.cmc.ca/.../CMC-00200-01917.aspx

with regards
Sam

Parents
  • Ersan.

    this is something I will be doing in the very near future but I will be using RTX as I want to include into my current project

    If I can get something going I will share the project with you.

    Intersting little things mems sensors.

    My interest is using it in conjuction with a GPS module. eg position bouncing around but no accelerations treat the system as stationary and try moderate the reported position due to GPS selectivity (is thats whats its called these day).

    I have a ublox gps sat on a window sill that says its moving in a area on average 25m in diameter, but occasionaly goes for a long walk a 100 m or so away.

    Danny

Reply
  • Ersan.

    this is something I will be doing in the very near future but I will be using RTX as I want to include into my current project

    If I can get something going I will share the project with you.

    Intersting little things mems sensors.

    My interest is using it in conjuction with a GPS module. eg position bouncing around but no accelerations treat the system as stationary and try moderate the reported position due to GPS selectivity (is thats whats its called these day).

    I have a ublox gps sat on a window sill that says its moving in a area on average 25m in diameter, but occasionaly goes for a long walk a 100 m or so away.

    Danny

Children
No data