• State Not Answered
  • Locked Locked
  • Replies 3 replies
  • Subscribers 22 subscribers
  • Views 1034 views
  • Users 0 members are here
Options
Related
How was your experience today?
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Cortex-M3 RS232 connexion

Didi R

I'm using 'LPC1788 Developer's Kit', i can't send data to my PC via RS232 port (URAT1).I tried some examples like Blinky, but nothing appears in my HyperTerminal.What could be the problem ? please help!

Parents
  • 0 in reply to ImPer Westermark

    I have RS232 port on both: board and PC, so there's no USB-to-serial adapter.
    The cable's fine.
    I have one RS232 port.
    My ULINK works fine.
    The board is configurated correctly.
    The software is made for this board, so i think it should work correctly without changes.
    I don't know what could be wrong because it still no response.

Reply
  • 0 in reply to ImPer Westermark

    I have RS232 port on both: board and PC, so there's no USB-to-serial adapter.
    The cable's fine.
    I have one RS232 port.
    My ULINK works fine.
    The board is configurated correctly.
    The software is made for this board, so i think it should work correctly without changes.
    I don't know what could be wrong because it still no response.

Children
No data