• State Not Answered
  • Locked Locked
  • Replies 2 replies
  • Subscribers 22 subscribers
  • Views 952 views
  • Users 0 members are here
Options
Related
How was your experience today?
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

ULINK ME stopped working with V4.22

Werner Meier

ULINK ME is no longer recognized after installing V4.22, with 4.20 it works..

anybody run into the same issue?

Werner

Parents
  • 0 in reply to David Young

    It does work now with V4.22. Sometimes after stop debugging, the device is not recognized anymore. It says in the Keil IDE, "internal DLL error" when I try to use the FLASH function. I did not observe this behaviour before.. Maybe it was a coincidence that re-activating V4.20 instead 4.22 caused it to work normal again.

    Werner

Reply
  • 0 in reply to David Young

    It does work now with V4.22. Sometimes after stop debugging, the device is not recognized anymore. It says in the Keil IDE, "internal DLL error" when I try to use the FLASH function. I did not observe this behaviour before.. Maybe it was a coincidence that re-activating V4.20 instead 4.22 caused it to work normal again.

    Werner

Children
No data