• State Not Answered
  • Locked Locked
  • Replies 5 replies
  • Subscribers 22 subscribers
  • Views 1442 views
  • Users 0 members are here
Options
Related
How was your experience today?
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

RTC

lorenzo meneghello

Hi all.
I have a problem whit initialize the RTC on lpc2368. I would have an interrupt every 15.6 ms from CISS register. Can someone help me also with sample code?
Thanks too much.

Parents
  • 0 in reply to lorenzo meneghello

    So you only have a serial interface - no debugger?

    How do you know the code doesn't spend 100% of the time in an interrupt handler - that you don't allow us to see?

    Where are the test printouts or the pin wiggling to tell you how far your code gets?

    Exactly what have _you_ done before posting here that the board "doesn't responds in any way"?

Reply
  • 0 in reply to lorenzo meneghello

    So you only have a serial interface - no debugger?

    How do you know the code doesn't spend 100% of the time in an interrupt handler - that you don't allow us to see?

    Where are the test printouts or the pin wiggling to tell you how far your code gets?

    Exactly what have _you_ done before posting here that the board "doesn't responds in any way"?

Children
No data