We are running a survey to help us improve the experience for all of our members. If you see the survey appear, please take the time to tell us about your experience if you can.
There are two sda1 and scl1 on the lpc2368?
And does anyone know the difference in pinsel between the two?
This code below does work but on a different variation of the board I have
It is your responsibility to find out what is the difference, and then modify the code to conform to the hareware design.
Chapter 9: LPC23XX Pin connect block
5.1.1 100-pin packages
Table 93. Pin function select register 0 (PINSEL0 - address 0xE002 C000) bit description (LPC2364/65/66/67/68 and LPC2387)
Thanks for your attempt.
Unfortunately something that a programming guy i spoke to last week forgot to tell me (something he did know too) was that on the mcb2300 you do have multiple channel 1's for i2c however both are being used.They are wired to various other things such as the output for uart etc as these channels can have multiple uses (4 uses) so infact the only channel of any use to connect devices too on the mcb2300 is sda 0 and scl 0.
Problem solved.