• State Not Answered
  • Locked Locked
  • Replies 12 replies
  • Subscribers 21 subscribers
  • Views 2486 views
  • Users 0 members are here
2025 survey

We are running a survey to help us improve the experience for all of our members. If you see the survey appear, please take the time to tell us about your experience if you can.

Options
Related
How was your experience today?
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

i2c lpc2368

chris gerretsen

There are two sda1 and scl1 on the lpc2368?

And does anyone know the difference in pinsel between the two?

Parents
  • 0 in reply to John Linq

    Thanks for your attempt.

    Unfortunately something that a programming guy i spoke to last week forgot to tell me (something he did know too) was that on the mcb2300 you do have multiple channel 1's for i2c however both are being used.They are wired to various other things such as the output for uart etc as these channels can have multiple uses (4 uses) so infact the only channel of any use to connect devices too on the mcb2300 is sda 0 and scl 0.

    Problem solved.

Reply
  • 0 in reply to John Linq

    Thanks for your attempt.

    Unfortunately something that a programming guy i spoke to last week forgot to tell me (something he did know too) was that on the mcb2300 you do have multiple channel 1's for i2c however both are being used.They are wired to various other things such as the output for uart etc as these channels can have multiple uses (4 uses) so infact the only channel of any use to connect devices too on the mcb2300 is sda 0 and scl 0.

    Problem solved.

Children
No data