We are running a survey to help us improve the experience for all of our members. If you see the survey appear, please take the time to tell us about your experience if you can.
I cannot seem to get anything out of UART0 or 1 using printf(). What is the correct way to program these UARTS?
Thank you, Stephen Blair
are you using the correct cable, some connections need R and T crossed, some do not. If you use std DB9 pinning (BTW it is not a DB :), althought everyboddy and his brother calls it that) you need R and T crossed in the cable or T and T will connect.
Erik
I thought this might be it at first too, but the 4 port serial card takes care of the pin swapping.