• State Not Answered
  • Locked Locked
  • Replies 15 replies
  • Subscribers 22 subscribers
  • Views 2412 views
  • Users 0 members are here
Options
Related
How was your experience today?
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Another MCBSTM32E board/software problem

Henk van Winkoop

Hi,

newbie getting a little tired of ARM and this hardware/software thing...

Using uVision4 with the MCBSTM32E board with a STM32F103ZE processor.

Besides the startup problem if I download some other example (RTX_Blinky) from the installation Cd-rom then the onboard color display shows the text as MIRRORED text! As if one is reading from the backside of the display.

Where are the experts? ;-)

B.t.w. I'm using Windows7.

Henk

Parents
  • 0 in reply to doubt that my ISP Al Bradford

    Thanks Al! There seems to be a sufficient datasheet on the web (www.google.com/search - check the hit at http://www.dema.net). Interestingly enough, this datasheet contains a preliminary stating that the document is confidential and may not be disclosed to third parties, so it's surprising to find it on a public product page in a freely accessible web shop (rather than in the starter kit box including the super-secret LCD hardware).

    Anyway. At a first glance, the registers and command bytes listed in the datasheet seem to match the GLCD code, so this seems to be a good point to start from. Thanks again!

    Cheers
    Dan

Reply
  • 0 in reply to doubt that my ISP Al Bradford

    Thanks Al! There seems to be a sufficient datasheet on the web (www.google.com/search - check the hit at http://www.dema.net). Interestingly enough, this datasheet contains a preliminary stating that the document is confidential and may not be disclosed to third parties, so it's surprising to find it on a public product page in a freely accessible web shop (rather than in the starter kit box including the super-secret LCD hardware).

    Anyway. At a first glance, the registers and command bytes listed in the datasheet seem to match the GLCD code, so this seems to be a good point to start from. Thanks again!

    Cheers
    Dan

Children
No data