Hi,
newbie getting a little tired of ARM and this hardware/software thing...
Using uVision4 with the MCBSTM32E board with a STM32F103ZE processor.
Besides the startup problem if I download some other example (RTX_Blinky) from the installation Cd-rom then the onboard color display shows the text as MIRRORED text! As if one is reading from the backside of the display.
Where are the experts? ;-)
B.t.w. I'm using Windows7.
Henk
I really have no answer for your problem but the LCD is the Ampire AM240320L8TNQW. I gooogled a couple of websites that said they have the data sheets but I found no user's guide. Good luck and keep us informed on your progress. Bradford
Thanks Al! There seems to be a sufficient datasheet on the web (www.google.com/search - check the hit at http://www.dema.net). Interestingly enough, this datasheet contains a preliminary stating that the document is confidential and may not be disclosed to third parties, so it's surprising to find it on a public product page in a freely accessible web shop (rather than in the starter kit box including the super-secret LCD hardware).
Anyway. At a first glance, the registers and command bytes listed in the datasheet seem to match the GLCD code, so this seems to be a good point to start from. Thanks again!
Cheers Dan