We are running a survey to help us improve the experience for all of our members. If you see the survey appear, please take the time to tell us about your experience if you can.
Hi
The combination of C51 V9.00/ V9.01 and the SiLabs uVision Driver V3.21 dosn't work properly. We use a C8051F124 with bank switching. After upgrading to the above described IDE version, we coulnd't set breakpoints ,in other banks than the common one. Today we got a new SiC8051F.dll from SiLabs, which fix this problem. As SiLabs toled, not all instalation seems to show this problem.
Regards
Raphael
as seen here and in the SIlabs forum Keil and SILabs are notorious for being "out of synch" most of the time.
If you have a combo that works and absolutotally can not manage two entries on your taskbar (IDEiocy) then be VERY careful to ALWAYS be able to go back.
The simple solution is to do all development with Keil and all loading and debugging with a freestanding SILabs IDE
Erik