• State Not Answered
  • Locked Locked
  • Replies 2 replies
  • Subscribers 22 subscribers
  • Views 960 views
  • Users 0 members are here
Options
Related
How was your experience today?
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

uVision3 and Z-Wave

Damiao Rodrigues

Hi!

I'm a student from Portugal developing a project using Z-Wave, specifically the Developers Kit (v5.00).

I have followed a tutorial provided by Zensys that instructed me how to setup a project for uVision2.

During the Build Target process on uVision3, I get a linker error:

*** FATAL ERROR L218: NOT AN OBJECT FILE
    FILE: C:\DevKit_5_00_Beta1\....\zw_slave_ZW030xs.lib

This seems to be an usual issue since I've already spotted the same problem at least twice in the Keil forums alone...

http://www.keil.com/forum/docs/thread12008.asp

http://www.keil.com/forum/docs/thread9736.asp

However, the threads end at the question phase...

Does anyone have an idea how to solve this?

Thanks,
Damiao

Parents
  • 0

    "I have followed a tutorial provided by Zensys that instructed me how to setup a project for uVision2."

    If you have followed their instructions, and they don't work, then you need to contact Zensys to find out why!

    It certainly looks like the zw_slave_ZW030xs.lib file is not a Keil-compatible library - so the first thing you need to do is confirm with Zensys that you have the correct library for use with Keil tools.

Reply
  • 0

    "I have followed a tutorial provided by Zensys that instructed me how to setup a project for uVision2."

    If you have followed their instructions, and they don't work, then you need to contact Zensys to find out why!

    It certainly looks like the zw_slave_ZW030xs.lib file is not a Keil-compatible library - so the first thing you need to do is confirm with Zensys that you have the correct library for use with Keil tools.

Children
No data