Dear all,
a couple of years ago I remember that I used a feature in UV3 and now this feature does not work anymore in the latest release of uVision.
I defined two targets in the same project: target1 and target2 for two different micros, and it was possible to use different files in the two targets (the asm startup files for instance).
I did that using the "Project Components" dialog window. On current release of UV4 this window is available on the menu Project/Manage/Components ... .
Now I am trying to do the same, but the changes I do to the dialog window fall in every Project Target, so all my targets have the same files.
Does it happen to you also? Is it a removed feature or I am doing something wrong?
I thank you all in advance, Marco.
What you need to is to clear the 'Include in build' option for the "unwanted" file in each target.<i/>
well yes, but the indication whether a file is to be compiled with the selected target is almost the same as the indication if any other setting (except the presence of a vertical arrow) deviates from the project defaults. this in conjunction with the fact that all files are display can create confusion.
"the indication whether a file is to be compiled with the selected target is almost the same as the indication if any other setting (except the presence of a vertical arrow) deviates from the project defaults"
No - it is the little arrow that indicates whether the file is to be built or not!
See: http://www.keil.com/support/man/docs/uv4/uv4_ca_filegrp_att.htm
The text is a bit misleading where it says "excluded from the linkage" - it does include "not translated"
OK, bad choice of word. I meant that exactly.