This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

LPC2141_USB interface

Hi all,

I want to use the USB feature provided in the LPC2141.
I want to use a pen-drive for collecting information from the hardware-board.
Is there need of any additional hardware in between my controller and USB port?? or can i use it directly???

I am not able to gather any useful information from the user manual of lPC 2141.

Please guide me on what to do...and how to approach the topic.........

pavan

Parents
  • The 2nd paragraph of section 1.1, on page 3, tells you:

    " ... USB 2.0 Full Speed device ..."

    The 5th bullet point of section 1.2, on the same page, tells you:

    "USB 2.0 Full Speed compliant Device Controller..."

    Chapter 14, starting on page 194, describes the USB Device Controller; the first line of the 3rd paragraph in that chapter tells you:

    "The device controller enables 12 Mb/s data exchange with a USB host controller..."

    That amply answers your question!

Reply
  • The 2nd paragraph of section 1.1, on page 3, tells you:

    " ... USB 2.0 Full Speed device ..."

    The 5th bullet point of section 1.2, on the same page, tells you:

    "USB 2.0 Full Speed compliant Device Controller..."

    Chapter 14, starting on page 194, describes the USB Device Controller; the first line of the 3rd paragraph in that chapter tells you:

    "The device controller enables 12 Mb/s data exchange with a USB host controller..."

    That amply answers your question!

Children