This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

RFID module and 8051 serial comm.

Hi,

I have project.This project consists a RFID module and 8051.

RFID module gets data from tag and sends to 8051 via UART. I have tested RFID module with PC's serial port and i havent any problem.I have seen data from tags.

I want to send this data to 8051. This data is changeful. Because tags are different. Sender side is ready(rfid module). But i haven't enough knowledge about serial communication between two microcontrollers.

How could i realize receiver side? RFID module sends datas from tags and 8051 will receive datas and it will keep in ram.

Thanks

0 erik malund over 16 years ago

a micro and a MAX232(equivalent) can as well.
Thr rest is just code.

Erik
Cancel
Vote up 0 Vote down

Cancel
0 ImPer Westermark over 16 years ago in reply to erik malund

Serial output is about the first think demo program does, besides blinking a LED.

Finding sample code that is also capable of receiving data from the UART is not hard. Not at all. Have you looked?
Cancel
Vote up 0 Vote down

Cancel