I'm trying to run the Keil example for the above board. 1/ I've moved J1 jumper to PD2. 2/ I built the software, but Uvision (3.8a) would not download it to the board ( siguv3arm.dll problem /). 3/ On a forum I discovered that you had to create a new project and 'import' all the example source code. This worked, and the LCD displayed MCBSTM32 HID.
4/ I've connected the board to my PC ( windows xp) via the USB lead. Sometimes it comes up with 'new device' etc. I told it that its a hid.
5/ I've run the hidclient.exe program, but it does not display the board. For device it displays <None>
6/ How can I get the above client to talk to my board ?
Thanks
Dear Martin,
The only Keil entry is the Ulink. I can't find Keil mcbstm 32 hid
As you stated in usbdes.c idvendor & id product are 0xc251 and 0x1c01.
Rowland
Hello rowland Roderick,
Have you tried to set jumper J1 to GND and then reset the board?
Best Regards, Martin Guenther
Yes i've tried J1 to GND.
I also tried connecting the board to an old PC.
It came back with Unreconized Device, but it didn't have the driver.
Hello Rowland Roderick,
for MCBSTM32 HID you do not need a special USB driver. XP detects it as HID device and uses the windows generic USB HID driver.
It seems that XP fails to enumerate the device.