I'm trying to run the Keil example for the above board. 1/ I've moved J1 jumper to PD2. 2/ I built the software, but Uvision (3.8a) would not download it to the board ( siguv3arm.dll problem /). 3/ On a forum I discovered that you had to create a new project and 'import' all the example source code. This worked, and the LCD displayed MCBSTM32 HID.
4/ I've connected the board to my PC ( windows xp) via the USB lead. Sometimes it comes up with 'new device' etc. I told it that its a hid.
5/ I've run the hidclient.exe program, but it does not display the board. For device it displays <None>
6/ How can I get the above client to talk to my board ?
Thanks
Hello Rowland Roderick,
for MCBSTM32 HID you do not need a special USB driver. XP detects it as HID device and uses the windows generic USB HID driver.
It seems that XP fails to enumerate the device.
Best Regards, Martin Guenther