• State Not Answered
  • Locked Locked
  • Replies 41 replies
  • Subscribers 23 subscribers
  • Views 4442 views
  • Users 0 members are here
Options
Related
How was your experience today?
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Topic: Event sequencer (for request for code for project)

mick menda

Hi all you programmer people

I wnder if some kind soul can help me?

I have a project on the go which involves 10 sequencial logic level outputs with presetable times on each of the output pins

I imagine it would be very easy to do with a chip if you know how. Unfortunately I don't know even basic programming so I was hoping that someone would take up the challenge.

I don't know what the times are yet so I would need very simple instructions as to how to set and change them.

Once the correct times are set they never need changing
I have access to a programmer so have no problem with the hardware

I know programming is easy but i am very busy and don't have time. Obviously, No doubt I could learn how to do the programming, I simply don't have the time. You people know and like chalenges. here is my chalenge for you.

Thanks for any help

Mike

Parents
  • 0

    It takes some skill and effort to even write a good specification for what you are trying to make, let alone implement it. It takes a professional engineer if you want a quality job. Of course, it can be done in amateur-home-project style, but that's a different story.
    Anyway, I think you expect a bit too much here.

Reply
  • 0

    It takes some skill and effort to even write a good specification for what you are trying to make, let alone implement it. It takes a professional engineer if you want a quality job. Of course, it can be done in amateur-home-project style, but that's a different story.
    Anyway, I think you expect a bit too much here.

Children