• State Not Answered
  • Locked Locked
  • Replies 2 replies
  • Subscribers 22 subscribers
  • Views 1632 views
  • Users 0 members are here
Options
Related
How was your experience today?
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

C161CS IAP

Roronoa Zoro

i would like to ask if I would be able to program an Infineon C161CS microcontroller using RS232? or is the microcontroller IAP capable?

thanks.

Parents
  • 0 in reply to Chris Wunderlich

    thanks for the reply chris.

    anyway, this is my current situation.

    1. i have a C code, and I use Keil to compile and have a hex file.
    2. i use a PSD Soft Express software (with RLINK-ST) to program my C161CS microcontroller.

    all is good if i just want to reprogram my microcontroller within the workshop. but what i want to do is to be able to re-program my microcontroller on site.

    in summary, i was hoping if you could point me to a direction where to start to be able to achieve my goal.

    thanks.

Reply
  • 0 in reply to Chris Wunderlich

    thanks for the reply chris.

    anyway, this is my current situation.

    1. i have a C code, and I use Keil to compile and have a hex file.
    2. i use a PSD Soft Express software (with RLINK-ST) to program my C161CS microcontroller.

    all is good if i just want to reprogram my microcontroller within the workshop. but what i want to do is to be able to re-program my microcontroller on site.

    in summary, i was hoping if you could point me to a direction where to start to be able to achieve my goal.

    thanks.

Children
No data