Hello,
I am using an LPC2106 CPU running at a speed of 10MHz, I would use a timer that counts in periods of 1 microseconds just as the system clock without interruption. I can check the system's a good time when I use a period of 1 millisecond but with 1 microseconds the error is very big, around 40%. Can anyone help me with that?
Best Regards,
Bruno CIn/UFPE Brazil
Note that the simulator will not be 100% clock-for-clock exact. The main task of the simulator is to compute identical results as the real processor. Being clock-for-clock correct may affect the simulation times a lot since then the simulator must not only produce the same end results, but must perform a large number of micro-steps or internal logic operations.
And another thing. The simulator doesn't even know all wait states in the real memory or all hidden extra logic in the internal processor busses of the processor.
Use the simulator estimations to get an approximation of number of clock cycles to run a code block. But don't rely on the information as perfect.
Per Westermark,
Thanks for your attention.
Best regards.