Hi every body, and happy new year to all keil users ;) I am using the C515C with keil v2.39, I want to generate a PWM signal using one of the pins 1.0,1.1,1.2 or 1.3, I read the manual, put I found it difficult, because I have to configure different things. Like the following parameters:
T2CON |= 0x10; ET2=1; EXEN2=0; CRCL = 0x22; CRCH = 0xFF; EX3=0; CCL1 = 0xFF; CCH1 = 0x22; EX4=0; CCL2 = 0x00; CCH2 = 0x00; EX5=0; CCL3 = 0x000; CCH3 = 0x000; EX6=0; CCEN = 0xAA;
What I know, is that we have to use compare mode 0.
But how can I set T2 to be ready for all things, and how I change the duty cycle while from the program results...
Is there any ready function that has one input which is the duty cycle?
And thank you for your time.
,,, no one answered me ,,,!! Please friends try with me...
Thanks
Maybe it would help if you re-posted your source code so that it's actually legible?
See: www.danlhenry.com/.../keil_code.png
"I found it difficult, because I have to configure different things."
Yes, that is the very nature of the exercise!
Don't Infineon provide any examples?