We are running a survey to help us improve the experience for all of our members. If you see the survey appear, please take the time to tell us about your experience if you can.
Dear sir presently we are doing an automotive project using LPC2368 controller. We are developing a receiver system which receives CAN messages from the CAN Network. We wants to implement the error handling in our project. We have to handle two errors in our system 1> Data Over-run 2> Error passive
We have written the codes for these errors but we are unable to get those errors in our system and we dont know exact procedure to simulate our code. Can you please provide some test codes so that we can generate these errors and handle them in an effective way.
And also we want some information regarding resetting of CAN controller Weather we have to reconfigure the CAN controller ( CAN initialization & Acceptance filter ) after bus off event or CPU initiated bus off event. Or previous configurations will be Reloaded (ie previously set baud-rate , Acceptance filter etc )
Thanks & Regards Giridhar
Can you please give some more information regarding those virtual registers . Or please send me the link which having information about those Virtual registers for CAN controller in LPC2000 series
thanks & Regards Girish