• State Not Answered
  • Locked Locked
  • Replies 10 replies
  • Subscribers 22 subscribers
  • Views 2328 views
  • Users 0 members are here
Options
Related
How was your experience today?
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

how to create new DF algorithm

Hans Ehlers

Hi,

could someone give me some advice to build another dataflash algorithm to download code via jtag to the dataflash connected at the spi interface (for the AT91RM9200 controller).

I just take a look into the AT91SAM9_DF_P1056_CS0 file, but I don't know where I can get the "Run User Programs After Build / Rebuild" (Options-for-target->User) flx-file.

And is it right, that I have to choose the internal RAM for the ROM definitions under options-for-target->Target, too?

best regards
Hans

Parents
  • 0 in reply to Hans Ehlers

    I'm sitting in front of the data flash code but I don't see the error / responsible for the errors.

    Reinhard, could you give me a example for the AT91RM9200 together with the AT45DB021B data flash from Atmel? I've only the internal RAM from the controller to test the data flash.

    best regards
    Hans

Reply
  • 0 in reply to Hans Ehlers

    I'm sitting in front of the data flash code but I don't see the error / responsible for the errors.

    Reinhard, could you give me a example for the AT91RM9200 together with the AT45DB021B data flash from Atmel? I've only the internal RAM from the controller to test the data flash.

    best regards
    Hans

Children