• State Not Answered
  • Locked Locked
  • Replies 40 replies
  • Subscribers 21 subscribers
  • Views 7114 views
  • Users 0 members are here
2025 survey

We are running a survey to help us improve the experience for all of our members. If you see the survey appear, please take the time to tell us about your experience if you can.

Options
Related
How was your experience today?
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Improper fixup

Dario Geisinger

Hi

I am receiving:

*** ERROR L121: IMPROPER FIXUP

MODULE: C:\KEIL\C51\LIB\C51C.LIB (PRINTF)

SEGMENT: ?PR?PRINTF?PRINTF

OFFSET: 0068H

I have tryied to read threads about this, but cannot understand it since it appears in a .LIB file

Any help? Really needing it.
Thanks for your time
Dario

Parents
  • 0 in reply to Arthur Neagus

    Oh dear, that must make me a habitual un-optimized coder
    not at all, as I replied to Per, what you did with DOS (hopefully) has no bearing on what you do with the '51.
    I, for one, do not apply the same practices to an ARM as I do to a '51, e.g. while I consider using a RTOS for the '51 totally ridiculous, I see nothing wrong with using one on an ARM.
    I do not recall what I did in my DOS days, but may, very well, be as 'guilty' as you.

    Erik

Reply
  • 0 in reply to Arthur Neagus

    Oh dear, that must make me a habitual un-optimized coder
    not at all, as I replied to Per, what you did with DOS (hopefully) has no bearing on what you do with the '51.
    I, for one, do not apply the same practices to an ARM as I do to a '51, e.g. while I consider using a RTOS for the '51 totally ridiculous, I see nothing wrong with using one on an ARM.
    I do not recall what I did in my DOS days, but may, very well, be as 'guilty' as you.

    Erik

Children