We are running a survey to help us improve the experience for all of our members. If you see the survey appear, please take the time to tell us about your experience if you can.
Hi
I am receiving:
*** ERROR L121: IMPROPER FIXUP
MODULE: C:\KEIL\C51\LIB\C51C.LIB (PRINTF)
SEGMENT: ?PR?PRINTF?PRINTF
OFFSET: 0068H
I have tryied to read threads about this, but cannot understand it since it appears in a .LIB file
Any help? Really needing it. Thanks for your time Dario
During my MS-DOS programming days, I now and then made use of the compact, medium or even large memory models.
Whoops - Now you mention it, so did I.
Oh dear, that must make me a habitual un-optimized coder ;)
Oh dear, that must make me a habitual un-optimized coder not at all, as I replied to Per, what you did with DOS (hopefully) has no bearing on what you do with the '51. I, for one, do not apply the same practices to an ARM as I do to a '51, e.g. while I consider using a RTOS for the '51 totally ridiculous, I see nothing wrong with using one on an ARM. I do not recall what I did in my DOS days, but may, very well, be as 'guilty' as you.
Erik
I, for one, do not apply the same practices to an ARM as I do to a '51, e.g. while I consider using a RTOS for the '51 totally ridiculous, I see nothing wrong with using one on an ARM.
On that point, I would certainly agree.