• State Not Answered
  • Locked Locked
  • Replies 2 replies
  • Subscribers 21 subscribers
  • Views 943 views
  • Users 0 members are here
2025 survey

We are running a survey to help us improve the experience for all of our members. If you see the survey appear, please take the time to tell us about your experience if you can.

Options
Related
How was your experience today?
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

AT91EB55 Evaluation Board

Jason Warren

Here is what I am trying to do:
Send Hello World out the serial port of the AT91EB55 Evaluation Board

Here is what I have:
I purchased the MDK-ARM kit and the AT91EB55 Evaluation Board.
And ULINK2 to download programs to external flash

I now wish I would have purchased the phytec board instead because all of the example programs are for this board.

Has anyone used the AT91EB55 board with this tool suite. I noticed this board is on the Keil Device database. So it should be fully supported just as
the Phytec board. So where are all the example programs for the AT91EB55?

What modifications to the target settings in the phytec hello world project would need to be made for the hello world project to work on the AT91EB55 board.

Thanks,

Jason

Parents Reply Children
  • 0 in reply to Jason Warren

    I am attempting to download to flash the phytec blinky
    project using ULINK2 to an AT91EB55 evaluation board.

    It programs then verifys and then the uVision program exits.

    I then go to open uVision back up and the last project loads as expected but all of the target settings have been removed. What would cause uVision to just exit with no warning or error?

    A list of all of the target settings to load a program on the AT91EB55 board would be very helpfull.

    Below is the version of the software that I am using:

    IDE-Version:
    µVision3 V3.50
    Copyright (c) Keil Elektronik GmbH / Keil Software, Inc. 1995 - 2007

    Tool Version Numbers:
    Toolchain Path: C:\Keil\ARM\BIN30\
    C Compiler: ARMCC.Exe V3.0.0.951
    Assembler: ARMASM.Exe V3.0.0.951
    Linker/Locator: ARMLINK.Exe V3.0.0.951
    Librarian: ARMAR.Exe V3.0.0.951
    Hex Converter: FROMELF.Exe V3.0.0.951
    CPU DLL: SARM.DLL V3.04
    Dialog DLL: DARMAT.DLL V1.04
    Target DLL: BIN\UL2ARM.DLL V1.26
    Dialog DLL: TARMAT.DLL V1.03