This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Hitex MX51 Emulator and Texas TAS1020 microcontroller

I am using uVision2 in conjunction with "Texas TAS1020". I use Hitex x51 emulator and the driver (http://www.keil.com/download/docs/119.asp) to debug my program. I would be happy if you could provide me some applications notes or information on how to configure and setup such environment using uVision2 and Hitex X51 so that I can access the TAS1020's onchip ROM functions and its peripherals such as I2C, USB.

My environment is almost working and I can start debugging and communicate with Hitex emulator and go step by step through my source code, but due to some problems I am not able to access the tas1020 onchip peripherals and memory space from within the code running on Tas1020.

Any help regarding memory maps (such as emulator overlay memory, target memory) and troubleshooting their issues is highly appreciated

Parents Reply Children
No data