• State Not Answered
  • Locked Locked
  • Replies 2 replies
  • Subscribers 22 subscribers
  • Views 1021 views
  • Users 0 members are here
Options
Related
How was your experience today?
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Serial and timer seem conflict

Vuong Toan Dung

void enable_timer(void)
{
TH0=0x01;
TL0=0x01;
TMOD = (TMOD & 0xF0) | 0x01;
ET0 = 1;
TR0 = 1;
EA = 1;
}

void serial_init(void)
{
PCON |= 0x80;
SCON = 0x52;
TMOD |= 0x20;
TH1 = 0xF3;
TR1 = 1;
ES = 1;
// PS = 1;
EA = 1;
}

I don't know why when i use 2 subs to initialize serial port and timer 0 but i don't know why timer 0 runs so slowly.Could anyone can tell me the reason why and show me the solution?Please answer me soon because I need it

Parents
  • 0

    How is CKCON set? what is clocking T0?
    Read-modify-write ops are used on TMOD, what is the absolute initial value?
    What is the state of the T1 interrupt?
    If you set TR1=0 does T0 run differently?
    Use your simulator and watch the peripheral windows, you'll see what's wrong.

Reply
  • 0

    How is CKCON set? what is clocking T0?
    Read-modify-write ops are used on TMOD, what is the absolute initial value?
    What is the state of the T1 interrupt?
    If you set TR1=0 does T0 run differently?
    Use your simulator and watch the peripheral windows, you'll see what's wrong.

Children
No data