This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Does the MCBx51 Evaluation Board also support 89C668?

I read the User's Guide of the above mentioned MCBx51 Evaluation Board and I saw that, next to the 'common' 8051 cores, also some 'exotic' versions are supported, such as 8xC664 (pg. 28 of the User's Guide).

Since there's mentioned "devices like", I guess that list is not final and more are supported.
I was wondering if the versions 89C668/9 in particular are also supported.

Best rgds,

--Geert

Parents
  • I was wondering if the versions 89C668/9 in particular are also supported.
    The 668 is one of the 66x siblings and should thus be full7y supported, the 669 (I wish they had not named it so) is a Mx sibling and thus most likely not. The 669 in 64k mode may be supported, but if you use 64k mode why use a 669.

    Erik

Reply
  • I was wondering if the versions 89C668/9 in particular are also supported.
    The 668 is one of the 66x siblings and should thus be full7y supported, the 669 (I wish they had not named it so) is a Mx sibling and thus most likely not. The 669 in 64k mode may be supported, but if you use 64k mode why use a 669.

    Erik

Children
No data