Hello, I got a problem with ULINK, as I tried to debug a XC866. If I select "Use XC800 ULINK" driver and open the settings the Microvision provides me an setup for an ST7ARM. Under utilities it is not possible to select the ULINK driver for the XC800 family. It simply not appear. I did reinstall USB driver without a result. At least I reinstalled µVision, but I am not able to debug the XC866 with this machine. ULINK itself works fine for XC866 on a notebook. Does anybody know, what may went wrong here and how to solve it ? Stefan
Maybe the entry in the file Keil\TOOLS.INI are messed up. Please check them. The section [C51] should contain the entries below:
[C51] BOOK0=HLP\Release_Notes.htm("Release Notes") BOOK1=HLP\C51TOOLS.chm("Complete User's Guide Selection", C) TDRV0=BIN\MON51.DLL ("Keil Monitor-51 Driver") TDRV1=BIN\ISD51.DLL ("Keil ISD51 In-System Debugger") TDRV2=BIN\MON390.DLL ("MON390: Dallas Contiguous Mode") TDRV3=BIN\LPC2EMP.DLL ("LPC900 EPM Emulator/Programmer") TDRV4=BIN\UL2UPSD.DLL ("ST-uPSD ULINK Driver") TDRV5=BIN\UL2XC800.DLL ("Infineon XC800 ULINK Driver") TDRV6=BIN\MONADI.DLL ("ADI Monitor Driver") RTOS0=Dummy.DLL("Dummy") RTOS1=RTXTINY.DLL ("RTX-51 Tiny") RTOS2=RTX51.DLL ("RTX-51 Full")
I have checked the entries, and only the RTOS0=Dummy.DLL("Dummy") was missing. Unfortunately µVision supports me "friendly" with a setup for an ARM as before. But thank you for the hint. May be it comes from another USB driver or another IDE I have installed on this machine. I try to find it. Stefan
Sorry, but we are unable to duplicate any issues here. Can you provide me with a screen dump of the output. Reinhard
I will provide you with the screenshots tomorrow. Many thanks for try to help me. Stefan