We are running a survey to help us improve the experience for all of our members. If you see the survey appear, please take the time to tell us about your experience if you can.
Hi there, I need to program a P89LPC932 already soldered on a board. I found an application note from philips that shows this procedure. It requires a chip called MAX3322. Unfortunately, this chip cannot be found. Is there any other way of doing this? Could I used the MAX563CWN that is included in the MCB900 eval-board instead? Thank you.
Don't worry about it, just connect FlashMagic to the serial port and off you go. Erik