• State Not Answered
  • Locked Locked
  • Replies 2 replies
  • Subscribers 22 subscribers
  • Views 970 views
  • Users 0 members are here
Options
Related
How was your experience today?
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

XC16x Autobaud detection unit

Stefan Fricke

Hi,

can somebody help me with the right setup for
using the the autobaud detection unit the right way.
I have problems with the generally steps to propperly setting up the ASC.
Also a more detailed description of the module as it is in the manuals is welcome.

Thanks Stefan

Parents
  • 0 in reply to Scott deWolski

    Hi Scott,

    thanks for this, but the autobaud detection in XC16x derivatives seems to have a little bit other function.
    A timer should be used, but you can select nine different baud rates before you start the detection.
    I found a good description with the APNOTE DS1 (June 2001) from Infineon for the
    C161U and C165UTAH.
    This show the way more detailed and uses timer 3.
    I will adapt this and your code hint.

    Stefan

Reply
  • 0 in reply to Scott deWolski

    Hi Scott,

    thanks for this, but the autobaud detection in XC16x derivatives seems to have a little bit other function.
    A timer should be used, but you can select nine different baud rates before you start the detection.
    I found a good description with the APNOTE DS1 (June 2001) from Infineon for the
    C161U and C165UTAH.
    This show the way more detailed and uses timer 3.
    I will adapt this and your code hint.

    Stefan

Children
No data