• State Not Answered
  • Locked Locked
  • Replies 8 replies
  • Subscribers 22 subscribers
  • Views 1741 views
  • Users 0 members are here
Options
Related
How was your experience today?
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

XC164 CAPCOM6 unit

Daniel Lid

Hi,

I'm new to the XC164 and microcontrollers.
I'm trying to setup the Capcom6 unit for a 100% PWM output on COUT60, 61 and 62. In debug mode (uVison2) the registers (under Peripherals T12, T13, CAPCOM6) are not updated when I single step my code. Could anyone help me with the right settings?

Best regards
/Daniel

Parents
  • 0 in reply to Gavin Pugh

    Hi Gavin,

    that's one of the ways. I dealt with old CAPCOM6 (tricky) and if I got it working,
    I had a little bit more understanding.
    For debugging purposes I misuse a starterboard with hardwired CAPCOM6 outputs and an oscilloscope to see, whether the signalforms are the expected one or not.

    For simulation your way is surely more practicable.

    Stefan

Reply
  • 0 in reply to Gavin Pugh

    Hi Gavin,

    that's one of the ways. I dealt with old CAPCOM6 (tricky) and if I got it working,
    I had a little bit more understanding.
    For debugging purposes I misuse a starterboard with hardwired CAPCOM6 outputs and an oscilloscope to see, whether the signalforms are the expected one or not.

    For simulation your way is surely more practicable.

    Stefan

Children
No data