• State Not Answered
  • Locked Locked
  • Replies 4 replies
  • Subscribers 21 subscribers
  • Views 1249 views
  • Users 0 members are here
2025 survey

We are running a survey to help us improve the experience for all of our members. If you see the survey appear, please take the time to tell us about your experience if you can.

Options
Related
How was your experience today?
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

passing carry bit to a function as parameter in C

Bahri Okuroglu

Dear all,

I have a small keyboard in my application and I poll all the keys periodically. I can read all the key values with 2 bytes. Next, I check the bits of these bytes for specific keys.

In my program, I have function (check_button()) which gets the byte value and the bit index of the required key. It extracts the bit using '>>' and '<<', and interprets the value. 

for (button_index=0; button_index<8; button_index++)
   check_button(button_port_1, button_index);

:
:
:

void check_button(unsigned char buttons, unsigned char button_index) {
   get the bit using << and >>
   process it
}

However, since this button checks are performed reqularly, I'm trying to re-engineer them for higher performance.

I'm not much familier with assembly, but following seems as a better way to do keyboard check:

for (button_index=0; button_index<8; button_index++) {
   button_port_1 >>= 1; (I need to get the carry bit)
   check_button(carry_bit_taken_above, button_index);
}

Finally, my question is: Is it possible to get the carry bit as above in some way, and pass it as bit parameter to a function in C?

Thanks for reading,

Parents
  • 0

    The question is really how to test a given bit in a byte. Here is code I often use.

    typedef unsigned char BYTE;

BYTE code  BMaskC[8] = {0x01,0x02,0x04,0x08,0x10,0x20,0x40,0x80};

main()
{
  BYTE Dummy;
  BYTE Button,Idx;

  if( Button & BMaskC[Idx] )
    Dummy++;
} 

             ; FUNCTION main (BEGIN)
0000 E500        R     MOV     A,Idx
0002 900000      R     MOV     DPTR,#BMaskC
0005 93                MOVC    A,@A+DPTR
0006 5500        R     ANL     A,Button
0008 6002              JZ      ?C0002
000A 0500        R     INC     Dummy
000C         ?C0002:
000C 22                RET

Reply
  • 0

    The question is really how to test a given bit in a byte. Here is code I often use.

    typedef unsigned char BYTE;

BYTE code  BMaskC[8] = {0x01,0x02,0x04,0x08,0x10,0x20,0x40,0x80};

main()
{
  BYTE Dummy;
  BYTE Button,Idx;

  if( Button & BMaskC[Idx] )
    Dummy++;
} 

             ; FUNCTION main (BEGIN)
0000 E500        R     MOV     A,Idx
0002 900000      R     MOV     DPTR,#BMaskC
0005 93                MOVC    A,@A+DPTR
0006 5500        R     ANL     A,Button
0008 6002              JZ      ?C0002
000A 0500        R     INC     Dummy
000C         ?C0002:
000C 22                RET

Children