• State Not Answered
  • Locked Locked
  • Replies 4 replies
  • Subscribers 22 subscribers
  • Views 1382 views
  • Users 0 members are here
Options
Related
How was your experience today?
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Can anyone tell me what´s the programming voltage on the DS80C320 Dallas chip?

Joel Buitron

We are a couple of guys on Bolivia, South America that are experimenting with this chip. However, due to our lack of information. Can someone please tell us the programming voltage (Vpp) and if it possible send us some schematic.
Sorry for our english mistakes. Hablamos español. Thanks.

Parents
  • 0

    The Dallas 80C320 does not have any internal Code memory (ROM, EPROM or FLASH) and therefore no programming voltage. You will need to store your code in an external part if you use this device. Dallas is coming out with a new part, the DS89C420 with 16K of internal FLASH (and up to 50 MIPS performance), which you should look at if you need the speed.

Reply
  • 0

    The Dallas 80C320 does not have any internal Code memory (ROM, EPROM or FLASH) and therefore no programming voltage. You will need to store your code in an external part if you use this device. Dallas is coming out with a new part, the DS89C420 with 16K of internal FLASH (and up to 50 MIPS performance), which you should look at if you need the speed.

Children
No data