just help me out interfacing of GPS and GSM with Cortex-M?
Hi Deewana,
I would recommend that you check out the http://mbed.org website, and notably the Ublox platforms that have a GSM and GPS module onboard. You will also find plenty of examples to interface EEPROMs and accelerometers to your micro. Let us know how it goes!
Hello,
http://mbed.org is a very good start.
is your question more about SW, hardware, systems design or top level operation?
Many companies offer boards and plug in modules to allow you to quickly prototype the system you mention above.
Please give us more information and we would be glad to give you more details !
hey
i don't want on board gps nd gsm...im beginner so to enhance knowledge i just wanted to know how this thing works.
Basically im making a project on accident detection system in car..So just guide me in this how to start with cortex-m
hey tnx..
i just saw it...it was grt help
But i don't want on board gps and gsm..just help me out in interfacing this with STM32 (cortex-M3)
Hi,
You should use any of the communication interfaces depending upon your I/O lines and project needs.
You can use GSM/GPS using UART/SPI communication & also it depends on the GSM/GPS Provider like what kind of interface they are providing
For Accelerometer/EEPROM many of the providers are giving an I2C interface.
And also check the Microcontroller what kind of interfaces are available.
Hope this clarifies your question.
deewana
Regards,
Manyam.