hi guys,
I AM DOING THE PATCHING FOR THE UCLINUX FOR THE STM32 DEVELOPMENT BOARDS.
COULD ANYONE HELP ME WHERE TO FIND THE STM32 PATCHES?
AND ALSO MY UBUNTU IS SHOWING "PATCH PROGRAM IS NOT INSTALLED"
@to STMicroelectronics and Sylvie Boube-Politano
Hi,
There is an uCLinux solution provided by "EmCraft SYSTEMS" company.
As explained in this page, Emcraft Systems hosts the full source trees of U-Boot and the uClinux kernel for Cortex-M3/M4 here: https://github.com/EmcraftSystems.
STMicroelectronics offers also an application note specific to STM32F1 parts called " Getting started with uClinux™ for STM32F10x high-density devices".
The application note document & firmware are available on this page: STSW-STM32024 Getting started with uClinux for STM32F10x high-density devices (AN3012) - STMicroelectronics
Hope this will be helpful for you.
-ST_Mayla-
thanks a lot mayla.. i got the correct link... but after i patch the stm32patch to the uclinux during configuration i cant use the command " make menuconfig" in linux it shows that something wrong in "mconf.c"