We are running a survey to help us improve the experience for all of our members. If you see the survey appear, please take the time to tell us about your experience if you can.
The AHB starting address is only a even or odd . If odd how to calculate the wrap boundary calculation in WRAP4 ,hsize=2.
Regards
Rajaraman R
All AHB transfers must be to addresses aligned to the HSIZE indicated width. So the starting address for a WRAP burst type can only be "odd" if HSIZE indicates BYTE transfers.
With HSIZE=2 (32-bits), HADDR[1:0] must be 2'b00, so all addresses in the WRAP burst will be word aligned.