We are running a survey to help us improve the experience for all of our members. If you see the survey appear, please take the time to tell us about your experience if you can.
Hi sir,
I am now new to AHB. In the AHB wrap4 transfer, i can use a second cycle is a busy cycle, and also i am using a WAIT state for first 4 clock .In spec says if u use a busy state then the slave provide a zero wait state. In my case i am using a busy for 2 clock and wait state for first 4 clock. So which part i can change busy state or wait state.
This is my problem:
Regards
Rajaraman R